The Various Facts and Benefits of Installing an Unvented Hot Water Cylinder

 If you have been getting constant leaks and breaks downs in your boiler system, it would better to have a replacement rather than to repair. In other situations, users may be paying higher bills using boilers with red jackets that would be paying for a correctly sized and energy–efficient boiler installation. On deciding to get a new boiler installation, there are many types of options available to you. Out of these unvented hot water cylinder installation is useful and energy–saving in most of the situations.

Benefits of upgrading to a new boiler system

 You would obtain faster heating time with an efficient and rightly selected boiler system. The new er boiler systems are equipped with super insulation which means that lesser energy is required to maintain the heat. Boilers constructed of stainless steel ensure that damage due to corrosion and rust gets avoided. The modern unvented hot water cylinder boiler systems also posses the holiday mode allowing for shutting down and restart after 30 days. The cylinders also come with a long-term guarantee of up to 25 years.

Facts about an unvented hot water cylinder

 1. The cylinders do not possess a storage tank and the water directly enters the cylinder from the water mains. In such cylinders, gravity does not apply to the pressure is directed from the water mains. Therefore the cylinders can be positioned at any height. You would be getting a powerful water flow at all times. Moreover, you would not have to worry about water getting frozen in the header tank during a highly cold season.

2. The system also does not suffer contamination as the system is sealed. Moreover, all the areas where the impurities can enter can into the water get bypassed. The unvented boiler cylinder system has fitted expansion vessel or a permanent air bubble infused at the top of the cylinder for accommodating water expansion.

3. Unvented hot water cylinder can employ whether the direct or the indirect heating system. One should get the installation of the unvented hot water cylinder form a qualified person having a current G3 unvented qualification. The installation of the unvented system must be notified to the building control. This would happen automatically if the installation is performed by members of Competent Person Scheme. The owners can directly get Building Regulation Compliance certificate.

You can get reliable and competent services for the installation of unvented hot water cylinder systems from Smart Gas Solutions.

COMMON BOILER PROBLEMS YOU MAY COME ACROSS

We want all our home appliances to work well without much maintenance and repair. Same goes with the boiler, as we don’t give much importance to it and expect it to work fine whenever we require a continuous supply of heating and hot water. But in the corner of our mind, we know that we can’t expect a machinery to work well always. Maximum of the boilers cause inconvenience during the cold winter phase since they have been inactive for a long time and are forced back to work.

But small issues and repairs are totally justified to get ourselves warm during chilling winters. Some common problems can be checked by you. You can contact Smart Gas Solutions to get cheap boiler repairs. To know more about their services, click here Now, let’s see what can be those common boiler problems.

FOLLOWING ARE THE COMMON BOILER PROBLEMS YOU MAY COME ACROSS:- 

• NO HEATING PRODUCED AND NO HOT WATER – 

Generally such an issue is caused due to broken diaphragms and airlocks, motorized valves not working, problems with the thermostat or low water levels. To ease your way, a practical way to start is checking an issue with boiler pressure or your thermostat. If the problem arises due to broken diaphragm or airlocks or valve, they might need to be replaced with a new one.

• BANGING AND GURGLING SOUNDS – 

 Such strange noises can be because of air in the system, it can be due to low water pressure or its kettling. Sudden pump failures are a very common reason for such banging noises, especially in older systems. If the noise is similar to a boiling kettle, then it can be a result of kettling. 

•  THERMOSTAT PROBLEM – 

 If your thermostat is working without any accuracy and is turning on/off when not needed then it’s time to replace the older with a new one. But you must check it thoroughly, as many of the times, some minor issues are overlooked. A crucial thing to check is that if the thermostat is at its position and if the settings are correct relating to time and schedule. There can be a possibility that it could have been knocked.

•  RADIATORS AREN’T HEATING – 

You may come across an issue where all the radiators aren’t heating or only the bottom section is heating. Such an issue can be due to a couple of reasons but the two most likely causes are air-build up or sludge in the system and unequal distribution of heat. If only the bottom ones are heating up, you may need to bleed it. This is quite straightforward and may not require an engineer.

•  LEAKING ISSUES –

 Leaking in the boiler can be due to many reasons. The most common reason can be broken internal part, pump seal or pressure valve. If the leakage is from pressure valve, it means the boiler pressure is too high. In case of leakage from pump seal, it may have become worn out and needs replacement.

You can contact Smart Gas Solutions if you face any boiler issue. They provide cheap boiler repairs and give it a long-lasting solution.

Top 5 Boiler Repair And Maintenance Mistakes To Avoid

Can you bath with cold water in this freezing weather? No, Right? A boiler perhaps in one of the most important appliances of your home. Without a boiler, you and your house would be freezing and trust us, you will be miserable. It is very important to provide the best of maintenance for the boiler. Because of busy schedules and laziness, we sometimes forget to get the boiler inspected regularly. Here is a list of mistakes to avoid for boiler repair and maintenance. 

 

·       Not Getting Yearly Inspection: Boilers need an inspection at least once a year. Check for leaking pipes, dirty and worn out parts. The boilers become less effective as the combustion particles settle over the parts of the boiler and hinder the working process. Smart Gas Solutions offers services of maintenance and boiler repair in Edinburgh at the best prices. The staff is experienced and knowledgeable and will provide you with timely services.

·        Not sealing Air leaks: Unsealed air leaks can reduce the efficiency of the boiler by up to 30%. If you see any drafts coming out of the vent when the windows and doors are shut, you should definitely check for air leaks and get them sealed.

·        Keeping the home too hot or too cold: It is advisable to turn off the thermostat before turning in for the night. This helps save a lot of energy. If there is a difference of eight degrees Fahrenheit or more between the day and night temperature of your home then the boiler will work extra hard. The excessive work can cause wear and tear in the boiler.

·        Fuel run out: If you have oil or propane running the boiler, then you need to make sure that it never runs out. Fuel runout can cause clogged filters and unwanted air entering the pipes. These problems can rip you off your pocket. Therefore, keep a check on the fuel level in the tank.

·      Not changing air filters: The air filters, if not changed, can increase the utility costs and keep the furnace from working effectively. A dirty air filter is bad for the HVAC system. It can also cause various problems like allergies, asthma, and respiratory conditions. Keep it clean to let the air keep moving. 

Smart Gas Solutions provides reliable and excellent heating and plumbing services. They offer the boiler servicing, heating installations, bathroom installations, LPG, general plumbing services and boiler repair in Edinburgh. The services are quick, efficient, and of the highest standards possible. The prices are competitive and the workmanship is of the highest quality.

Visit the website http://www.smartgassolutions.co.uk/ now.